J-B Weld 8267UK SteelStik Epoxy Putty

Product Information

VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius. When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid. Sampson, William (September 16, 2013). "In the Shop: Wood repair products from J-B Weld". www.fdmcdigital.com. CabinetMakerFDM . Retrieved March 27, 2015. After the initial setting period of a few hours, heat (e.g. from a heat lamp or incandescent light bulb placed near the bond) will speed the curing time. [2] [7] Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White

Since 2008, the company has broadened the product line to add J-B SteelStik, KwikWood, PlasticWeld, MarineWeld, Perm-O-Seal, WoodWeld and ClearWeld. [5] [6] J-B Weld epoxy [ edit ] The Plastic Padding Super Steel comes in two tubes. When the contents of the tubes are thoroughly mixed, the curing process begins and you have a short period to place and use the mixture. The mixture hardens and soon cures to be as strong as steel. Features & Benefits: J-B Weld is a two-part epoxy adhesive (or filler) that can withstand high-temperature environments.a b c d e f "Repair Products UK Ltd: Metal Glue - J-B Weld", Repair Products UK Ltd, 2009, RProducts-42. The epoxies tested include Gorilla epoxy, Devcon Plastic Steel, Loctite Epoxy Weld, JB Weld original, JB Weld Kwik Weld, and JB ExtremeHeat. This more or less covers the entire gamut of epoxies you would find in the glue aisle of your local home supply store; the Gorilla epoxy is your basic 5-minute epoxy that comes in a double barrel syringe, and the JB Welds are the cream of the crop.

PRODUCT FEATURES AND STRENGTH: J-B Weld SteelStik has lap shear strength of 900 PSI, can withstand continuous temperatures up to 350F (176C ) and intermittent temperatures of 450F (232C), and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured. SteelStik can be molded, shaped, sanded, drilled and tapped. CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original set and cure color is dark grey. But an oil leak onto the exhaust threatened to derail the trip. The leak was due to the valve cover stud in the lower left corner of the head being stripped in its hole and thus not tightening, which prevented that corner of the valve cover from sealing. This caused oil to drip directly onto the downpipe, which was a clear fire hazard. At the time, I repaired the stripped threads with a Time-Sert (helicoil). The car still appeared to be weeping a small amount of oil through the threads onto one of the exhaust studs, but this is a common problem, as the lower exhaust studs thread directly into oil runoff area on the low side of the head. I made it home without incident, and that spring I road-tripped the car 2000 more miles to other events.And, regarding my BMW 2002tii, if the J-B Weld patch fails and I can’t find a replacement cylinder head, I can always, you know, just LS1 it.