RPM2 Mesh Coils 0.16 ohm for SMOK RPM 2 Meshed Pod Coil Nord 4 X RPM2 2S Scar P3 P5 IPX80 Thallo S Vape Kit Pack of 5

Product Information

I’ve already mentioned the IP67 rating included as part of the external protections of the device. What else does the IPX80 offer us? Using the RPM2 0.16ohm mesh coil at 40W I was able to get 9 hours continuous use from the 3000mAh internal battery. During which time I vaped around 10ml of juice with the puff counter hitting a grand total of 226. It’s also IP67 rated meaning it’s able to withstand the ingress of water to a depth of anything approaching one metre. Inside the box besides the IPX-80 itself you get the usual scattering of paperwork and a USB-C charge cable along with two RPM-2 coils. The opening is also wide enough to accommodate most bottle nibs too. Smok IPX80 Pod Kit – How To Fill the Pod

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.Overall, I really liked using the SMOK IPX80 for my regular nicotine ejuices. The battery lasts for a long time no matter which coil you use and that’s a strong point of this kit. The internal battery includes all the usual protections you would expect to find and it’s said to have a very rapid firing response time of 0.001 seconds. Having said that, you’re not likely to fiddle about with it too much once the sweet spot has been found.

I really like the screen on this device. It’s tall and in full color and it just looks really nice. At the top of the screen is a battery life indicator complete with percent. The set wattage is in big numbers in the middle of the screen, followed by the coil resistance, voltage, a puff counter, and puff time. Finally, the Smok IPX80 features a clear 0.96in colour TFT screen to display all the information needed from wattage output to battery strength. Smok IPX80 Pod Kit – Specifications The color of the screen can be changed by pressing the fire button and + adjustment button simultaneously. This changes the UI color to either white, blue, green, red, yellow, or purple. The problems arise when it comes to the 0.6ohm MTL coil. The dual adjustable airflow dials just aren’t rigged to accommodate the restriction required. So the audience is also going to be restricted (like what I did there? lol). The inhale is a much quieter affair than witnessed with the 0.16ohm mesh coil and remains as smooth and turbulent free too.When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment So the diversity of the airflow system is most effective for those already familiar with the various restrictions available for direct lung vaping. I think I’d better move on before compatibility chaos ensues and I develop the inevitable headache from hell! lol On the plus side, the RPM2 pod isn’t going to accidentally fall out either. It may be heavily recessed but four strong magnets align with those of the inner battery, securing it into place. When it comes to selecting an e-liquid, we recommend a 50% PG or high PG option for MTL coils, while sub ohm coils for DTL vaping will work best with either a 70% VG e-liquid or higher.

Incredibly there’s still enough airflow for a very restrictive direct lung pull but it’s an uncomfortable experience – the coil is finally showing it’s true intent. Coils insert into the bottom of the pod by way of press fit. Two coils come included with the IPX80 kit: I started off using the IPX80 with the 0.16Ω coil. This is a mesh coil with a wattage range of 25-50W so I filled it up, waited 5 minutes, and went straight to 40W which is the recommended ‘best’ wattage. This coil is a direct lung coil no matter how you set the airflow. Even with the airflow fully closed, it’s at best a slightly restricted direct lung hit. To talk about the flavor, it’s impressive. The vapor is really tasty and nice and warm at 40W. For a pod mod the IPX80 does well in the flavor department with this coil. I used a 70VG ejuice with this coil.Again it’s been IP67 protected by means of a rubber cap. I didn’t find it the easiest to remove and actually caused me some frustration during multiple attempts to prise it open. I’m a nail biter so that obviously doesn’t help. The Smok IPX80 pod kit uses the very same RPM2 coils of the Smok Scar P3 pod kit, RPM2 pod kit as well as the Smok Nord X and Smok Nord 4 pod kit. There’s no rattling when shook and it takes a fair degree of force to remove it once connected. Impressive stuff. Just bare in mind the pod will only fit one way.. There’s a very minimum amount of airflow restriction and the vape although a little noisy offered up no turbulence. A very smooth inhale all around in fact.

Yet it always adds to the overall aesthetics and ergonomics with pod kits so it’s one of those “ if it ain’t broke don’t try to fix it” moments, I guess. To improve the performance of the Smok IPX 80 Pod Mod Kit, Smok IPX 80 Replacement Coils are essential. Crafted with precision and innovation, these coils deliver a premium vaping experience, producing rich and flavorful clouds with every puff. For vapers seeking a satisfying and reliable vaping venture, the Smok IPX 80 Replacement Coils are a must-have accessory that guarantees a delightful vaping journey. To sum it up, this has got to be one of the best vaping experiences I’ve encountered so far on a pod based system.

In the real world it should be considered to withstand the elemental forces of Mother Nature. Just saying lol. What Can We Expect From the Smok IPX80 Pod Kit? I received an early sample edition of the Smok IPX80 pod kit and judging from the sleeve, Smok is putting a lot of emphasis on the pods waterproofing abilities. Overall the build quality of this device is excellent. The design isn’t exactly original but it looks good on this device. The IPX80 is going to lose some style points for the overplayed design but otherwise it gets good scores. There’s also a compromise in flavour property. The increased warmth generated by the coil seems to nullify clarity and presence of the fruits while vapour production is as consistent as ever.