12 mm BATH EDGING QUADRANT BEADING SEALING KIT READY MITRED SPECIAL SIZES CUT TO ORDER WATER RUNS BACK IN TO THE BATH NOT DOWN THE WALL

Product Information

Choose the correct type of silicone sealant that is compatible with your chosen wall or floor coverings (such as natural stone, porcelain tiles or ceramic tiles). Ensure the bead of silicone sealant is continuous and thick enough to fully cover the gap between the shower tray and the tiles. This is often the only solution to get a waterproof seal, if the gap between the tiles and the shower tray is too large. Follow the manufacturer’s instructions – As a rule of thumb shower doors and enclosures should only be sealed around the outside at the bases and on the inside and outside of the vertical profiles where they meet the tiled walls.

Apply gentle but even pressure and draw the tool along the length of the shower tray, remove excess silicone and leave a neat bead as you go.Room H2O appreciates that DIY is not everyone’s cup of tea and there are some jobs you would rather leave to the professionals. Residual pressure can remain in the tube causing silicone sealant to leak from the nozzle so take care! It should specify that it is suitable for use in bathrooms / wetrooms and contain an anti-mould and bacterial additives such as Kerakoll Fugabella Eco Silicone Sealant or Kerakoll Fugabella AM Silicone Sealant, which are both available from our sister company UK Tiles Direct. Remove loose deposits and surface dust with a vacuum then, with a damp cloth that has been soaked in a mixture of warm water and mild detergent to remove any stubborn deposits, thoroughly clean and dry the area where the silicone sealant will be applied (the shower tray surface and tiles). Starting from the point the silicone was first applied, place the silicone sealant smoothing tool against the shower tray and tiles.

If using a tool to smooth the silicone sealant, select the correct aperture size to produce a bead that will fully cover the gap between the shower tray and tiles. Here are some handy tips to set you on the right path and make sure you apply silicone sealant correctly to achieve a professional finish and prevent water leaks. With that in mind, we offer a full range of specialist services from bathroom installation services in Dorset to made to measure shower enclosure survey and installation services throughout the South East. Thoroughly dry the shower tray area with paper towel or allow the shower tray to air dry for a couple of hours before applying the silicone sealant, which will not adhere properly should any moisture remain.

Made from rubber and designed to remove excess sealant, these handy tools will help you achieve a neat bead of silicone when sealing a shower tray. When sealing a bath, follow the preparation advice above but remember that there is one crucial extra step you will need to take before reaching for the silicone sealant. Usually, fresh silicone should be left to dry or cure for a minimum of 24 hours, although this depends on the brand and type of sealant. If you cannot find the information that you require please leave a post in the DIY Forum as one of the many Forum members may be able to help.

Seal that shower – Follow our shower tray sealing tips above for hassle-free shower sealing with a smooth, neat finish. Should you require more information about our shower sealing and bathroom fitting services, do not hesitate to get in touch.One of the most common causes of water leaks from shower trays, shower enclosures and baths is the poor application of silicone sealant.