About this deal
So - I cleaned the surfaces with Dawn dish soap to remove ANY contaminants and also any wax that may have found its way onto the surface. The application went as described and i used about 3 towelettes to do 90% of my F-150 super crew XL.
Treat it like fast drying paint and just make a couple of straight Passes with the little applicator cloth while it is still very wet. This includes cleaning and prepping the surface then followed by drying using a quality microfiber towel.Try to only apply in one direction, overlapping a little on each row of product (as the instructions suggest).
This product certainly worked at restoring my plastic panels, but, on larger areas it was difficult to avoid a streaky, uneven appearance. You do not want to introduce any water or moisture to the product until it has cured, and that will be around 1 hour after application. IT didn't lose any of its hydrophobic properties or shine or that deep revitalized pigment it gave the plastic once it was used. But if you have some, or if you are a professional, we would suggest using a dedicated automotive degreaser. Pick one plastic panel to start with and start applying it in the same direction consistently to ensure the best coverage and an even streak-free finish.If this occurs wipe down with a dry microfiber and allow the ceramics to cure and dry usually for around 1 hour.
I am looking for ways I can give my 240 some love and saw this product recommended in a youtube video. The multi-step reaction process used to produce Cerakote ® Trim Coat is protected as a US Federal Trade Secret.Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.