Teltonika 4G-RUT240 Compact Industrial 4G LTE Router

Product Information

The figure below is an example of the Flash New Firmware Image section and the table below provides information on the fields contained in that section: The routeris supplied with 2 x WiFi antennas, 2 x cell Antennas, 1 x Patch lead and 1 x UK Mains Power Adapter.

Changes the interfaces allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.

Teltonika Compact Din Rail Kit

The Update Firmware section is used to upgrade the device's firmware. Firmware can be upgraded either from server or from an image uploaded from your computer. Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations. A Phone Group is a collection of phone numbers that can be used as the recipient in SMS & call related services instead of specifying every number individually. The phone group list is empty by default thus, you must first add at least one new group before you can add phone numbers to it. To create and begin editing a phone group, follow these steps: Fixed provider information and IMSI value representation when SIM and modem cannot provide this information Choose the network(s) you want to attach to this wireless interface or fill out the create field to define a new network.

The General Configuration section is used to enable the Scheduler itself. Created instances won't work unless this option is turned on. T_F - test feature. A test feature firmware usually contains some new feature that is not present in the release version. However, unlike the release version, the feature version will not include other fixes, has not been thoroughly tested and approved for release Next window that opens will be Device Configuration. Values there, mostly, should be left unchanged to avoid connection problems, because they are dictated by Access Point. Other than that, only difference from Access Point settings are in Interface Configuration → General Setup section, where Mode is set to Client, and Network attached to this wireless interface is wifi1 instead of LAN While the device is designed to accept input voltage of up to 30 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply. The Certificates, Keys and Requests section display files generated on or imported to the device along with the most important information related to them.The Certificate Generation tab provides the possibility to generate TLS certificates required for secure authentication and communication encryption used by some of the devices services.