Aico EI1529RC Hardwired Smoke Alarm Remote Test, Hush & Locate Switch , White

Product Information

Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive) The Ei1529RC is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From then you can identify which danger is present and the action you should take. Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system.

If a product fails after six months of receiving the item it is considered a warranty claim and is the responsibility of the buyer to pay for the return postage. We will then dispatch a free-of-charge replacement once the original has been received and tested. Book a DPD Return HereSuitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms. Locate Switch: If the Alarms are sounding, pressing the Locate Switch silences all but the originating Alarm, thus allowing easy identification of the source of the alarm. The unit has three switches marked Locate, Test and Silence to control the features described above Add to quote” – this option allows to you gather items together and ask us for a no obligation quote. We’ll do our best to improve our already competitive prices where possible. Compatible with 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms, 140RC Series alarms and hard wired interconnected Carbon Monoxide alarms

Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive). Wall mounted for ease of use can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied). Our goal is to provide one stop place for electricians and electrical contractors, but we are happy to help other clients too.

We Provide:

The EI1529RC from Aico is a mains, 230V, powered remote control switch for use with their 2100 and 160RC series of smoke and heat alarms and with the 260 series of carbon monoxide alarms. Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives. This model of Control Switch is hard wired into the system, but there are wireless versions available. The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes

Locate, identify a triggered alarm: The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes Test Switch: Allows the user to test all the interconnected Alarms at once from a convenient point rather than having to press the test button on each Alarm. I have used Fastlec three times each time I have found them to be efficient fast and happy to give you information on their products." Remote test and hush switch specifically designed for use with the Ei161RC, Ei164RC or Ei166RC, and with the Ei2110 series. Aico EI1529RC Mains Powered Remote Control Switch - functionsThe use of the remote control switch increases the flexibility and ease of use of these alarms by allowing the alarms to be located, silences and tested remotely. This mains powered accessory increases the flexibility and user friendliness of the alarms by allowing the user to remotely Test, Locate and Silence alarms in the system: Hush Momentarily pressing the Hush button switch allows remote silencing of false alarms. The system will reset automatically after approximately 10 minutes. In the unlikely event that a fire should occur during the Hush period the feature will be overridden when sufficient smoke has entered the sensor chamber of the smoke alarms in the system, or sufficient CO has entered the sensor of the CO alarms in the system. Note: The Hush feature will not operate if the CO alarm is sensing CO levels of 300ppm or above due to the increased danger. Please let us know should you like to discuss anything and we’ll get you in touch with an electrician who can provide a professional advice! Ideal for elderly or vulnerable users, the wall-mounted switch tests, locates or silences your interconnected smoke alarms from an easily accesible low-level position. This item is guaranteed for five years.