Hycote Fast Drying Aerosol Wheel Spray Paint, Silver, 400 ml

Product Information

Drying Time. You don’t want to spend too much time on a single project. Therefore, it’s prudent to get a paint that takes roughly less than an hour to dry to the touch so you can apply the final coat and be done in a short time. Great product and service Brilliant quality, easy application, high-quality finish. Great service as always! –

The longevity of wheel paint varies depending on your climate and the road surfaces where you drive. However, taking the time to sand, prime, and apply a clear coat will help wheel paint last longer. FAQ

Wheel Silver Paint Overview

It is a fast-drying lacquer spray paint that matches the standard alloy wheel paint used by Porsche, BMW, Mercedes, VW, Audi, Fiat and most other European manufacturers. Also excellent on TSW Alloys and GM Vauxhall. That's just a small part of what goes into each and every Alloy wheel. For more than 30 years, Wheel Manufacturers have been producing award-winning, soundly engineered wheels for car enthusiasts the world over.

Use a d-limonene (citrus) based cleaner to remove any road tar or oil. Apply P21S®® Total Auto Wash to surfaces and let soak in, agitate with a long-handled boar's haired brush before rinsingInvest in quality sandpaper. Because preparing your wheels’ surfaces is important for achieving smooth, even results, sandpaper is a vital tool. Opt for a coarse grit – 350 or lower – for the best results. A. These types of wheels are the most challenging to paint, but it can be done effectively. Start by spraying the wheel paint directly into the small, tight spaces in the wheels, and then allow it to dry. Next, spray the paint over the entire surface of the wheel. Using this method will ensure that you don’t miss any of the tiny crevices in your wheels. Best Product I have ever used Excellent match for BMW wheels, even better than the BMW spray. Great for touch-ups and easy to use. Combined with Wurth lacquer produces a superb finish. Jeff – Carlisle Better than anything else I’ve tried The product is far better than anything you can get from Halfords or Euro Car Parts by a long way. Perfect for Mercedes Benz, you do need the clear lacquer and as stated in the advert 1 can of each will do 2 wheels I wouldn’t try and stretch it any further. Great service really pleased. Mike Quilter – Southampton The Wheel paint finishes are meticulously researched, refined and tested some are manufactured using very special techniques and paint finishes which sets one wheel apart no only in looks but performance as well.

Don’t underestimate the importance of clean surfaces. If you don’t properly remove dirt, dust, and grease from your wheels before you paint, a uniform finish is impossible. Take eye protection seriously. A typical pair of glasses isn’t enough to protect your eyes when using wheel paint. Slipping on a pair of goggles designed for working with potentially dangerous chemicals or tools will provide the best protection. Great product that achieves a pro finish. A very high-quality product than defies conventional wisdom that says pro finishes cannot be achieved via aerosols – gives a superb and eye catching “german” silver shade when topped with Wurth Lacquer Jeremy – Peterborough Q. I plan to paint my wheels outside this summer. Do I really need to wear a mask since ventilation won’t be an issue? Have several pairs of disposable gloves and masks on hand. Since you may have to change your gloves or mask several times during the painting process, it’s a good idea to be prepared with plenty of extras.Wheel paint is specialised paint that can withstand harsh outdoor conditions, which means quality is important. Look for a wheel paint from a trusted brand with a reputation for quality results and longevity. Paint with two thin coats of silver alloy paint (Wurth German Alloy Silver Wheel) to ensure complete coverage Manufacturers pay strict attention to Quality Standards, so when you refurbish or refinish alloy wheels due to kerb damage doesn't it make sense to replace the protective coating with the very same paints that are applied to the alloy wheel during Manufacture.