Maxibright Daylight 660W PRO LED Grow Light

Product Information

The Maxibright LED Grow Light has been designed so that it’s easier to transport than similar alternatives. For this reason, you’ll need to assemble it when you receive it, which can be done comfortably in 5-10 minutes. This means that you can get it through tight spaces like loft hatches. It comes in a box that’s easy to transport and store, and won’t require a pallet delivery.

The Maxibright LED Pro Grow Light is designed to be used over a 120cm x 120cm or 150cm x 150xm square growing area. In this situation it offers an incredibly even footprint. We found that 60cm above the canopy is good for veg but for small plants you might want to begin up to a metre above the tops of the plants and reduce the height gradually over the course of a week or two. If you see any signs of stress (leaves hanging down as though they were wilting) then raise the light up again. The DAYLIGHT 660W LED PRO is our ‘Flagship’ high output LED lighting fixture. With a blisteringly high total output (PPF) of 1848 μmol/s this unit pushes LED grow lighting to the next level. It’s 6 bars of high-efficiency Osram and LUMLED LED chips cover a 1.5 x 1.5m area perfectly, with outstandingly uniform light coverage. In addition to its new lightweight and slimline design, the 660W PRO has easy clip on bars making one person assembly a breeze. Introducing the Maxibright Daylight LED Grow Light - 660w Pro, the ultimate grow light for those who demand the best for their plants. With its cutting-edge LED technology, this bad-ass grow light delivers an unparalleled level of intensity, spectrum coverage, and efficiency. Lumatek LEDs are supplied disassembled, andinboxes that areeasy to transport, unlikethe Gavita 1700e which requires a pallet delivery. This means that they can easily fit into awkward places - though loft hatches, for instance.They can be assembled by a competent person in a matter ofminutes. The new full spectrum Daylight LED technology grow lights from Maxibright are high output units that push the envelope for plug-and-play LED grow lights. A superior fixture efficiency works to improve final yields.The includedcontroller has four output settings:25%, 50%, 75% and 100%. It's also possible to regulate multiple units simultaneously using the (separately available) Lumatek lighting controller. Future Garden are not liable for any additional fees that may be incurred. Any unexpected costs must be paid by you (the customer). This kit has been carefully put together by the team at the One Stop Grow Shop and includes just about everything you need to get the best out of these high-end LED grow lights. All the major parts of this kit have been chosen to match each other perfectly - they'll get you up and running in style!

It depends on the LED grow lighting, the wattage and the μmol/s output. For fruiting and flowering, you'll need 800-1000 μmol per square metre. Many growers swap out their HPS systems for like-for-like equivalents in terms of power - in other words, they'd swap 600 watts of HPS for the same wattage in LED grow lights, with the expectation of getting much bigger yields. Can You Use LED Grow Lights for Cuttings? We don’t sell purple LEDs at GroWell – this is down to the fact that they’re not full spectrum lights. For true, healthy growth, plants need a full spectrum. Full spectrum LED grow lights emit a light that’s white. These are the only LED lights we sell. CarboAir Rope Ratchet Hangers - Perfect for hanging this unit How the 660w Maxibright LED Daylight PRO Grow Light Works A fanless, solid-state design provides silent operation and eliminates the risk of mechanical failure. High-quality components and passive heat dissipation, teamed with the ability to dim the units to 25% power, allows you to flexibly control grow room temperatures in any weather. This unit has been designed so that it’s easier to transport than similar alternatives. For this reason, you’ll need to assemble it when you receive it, which can be done comfortably in 5-10 minutes. This means that you can get it through tight spaces like loft hatches. It comes in a box that’s easy to transport and store, and it won’t require a pallet delivery.s crop of LEDs marked the point where LED lighting overtook HPS as the industry leading technology - and Lumatek LEDs are amongthe best of the bunch. Like the Maxibright Daylight LED and Gavita LED, it features a design that uses multiple lighting strips. This spreads the diodes out across the canopy, creating a footprint that's almost perfectly even. Regular lamp and reflector set-upsjust couldn't get close to this!This type of LED grow light is sometimes called a "spider". Introducing the DAYLIGHT 660W LED PRO, our ‘Flagship’ high output LED lighting fixture. With a blisteringly high PPF of 1848 μmol/s and a fixture efficiency of 2.8 μmol/J. This unit pushes LED grow lighting to the next level. It’s 6 bars of high-efficiency Osram and LUMLED LED chips cover a 1.5m x 1.5m area perfectly, with outstandingly uniform light coverage. In addition to its new lightweight and slimline design, the 660W PRO has new and improved clip on bars making one person assembly a breeze. LED grow lights are great if you're looking to keep running costs down. They're more efficient, with a bigger output per watt. So yes, they can be cheaper to run if you swap out an HPS system for an LED with an equivalent light output, as it will consume less power. How Long do LED Lights Last?

Lumatek Zeus grow lights can be assembled in around five minutes. All you need to do is put together the frame, screw the driver (power supply) in place, fit theLED light strips, and connect up the controller. The Lumatek Zeus Pro 465w is great for a 1m square area but could be used in a 1.2m area. Lumatek recommend a light height of around 500mm (perhaps a little lower for the 465w version). However, this is only a general guide. When plants first go under an LED grow light they can take a while to adjust to it. When the plants first go under it, we would recommend a slightly higher distance from the light to the top of the canopy, or turning down the power. Over the course of several days the light height can be reduced slowly and/or power can be increased gradually. After the plants have developed it may be possible to reduce the light height to below 500mm. Keep an eye out for any signs of stress (droopy or discoloured leaves) and increase the light height if necessary. The many benefits on offer from the Maxibright Daylight LED grow lights are convincing even the most hardcore HPS growers that switching is more than worth the investment. LED grow lights saving money in the long run as they produce less heat. LEDs waste less electricity to heat. At 2.7μmol per Watt and 1782μmol total, you get way more plant usable light with a Maxibright Daylight LED Pro than from a high-end HPS fixture (typically 1.9μmol)! When you also factor in the overall output of 660W, that’s a seriously impressive intensity for insane levels of growth and flowering!

An IP65 ingress rating protects the unit from high grow room humidity levels. An LED lifespan rated at >50,000 hours and 3 year warranty supports your buying decision and makes this LED grow light a worthy investment. Fit the six LED strips to the main body making sure to open the grey clips on each bar before mounting them. Large items are sent via a standard 48L (48 hour large) service. Large items take from 2 working days to arrive.

The footprint of the Maxibright Daylight 660 W LED Pro light suit grow tents from 1.5 x 1.5 meters. This unit is easier to transport than similar alternatives. For this reason, you'll need to assemble it, which can be done comfortably in 5 - 10 minutes. This enables it to fit through tight spaces like loft hatches. It comes in a box that's easy to transport and store, and it won't require a pallet delivery. In terms of ‘price versus performance’, the Maxibright LED grow light is one of the best LED grow lights we’ve tested so far. It produces an incredibly even footprint, and utilises highly efficient diodes that produce output levels of up to 3.1 μmol per watt! This kit contains everything you need to get started with a Maxibright Daylight 660w Pro LED grow light. We've included the excellent BAY6 1.2 x 1.2 x 2.0, which will make an excellent home for your set-up. Also included is a heavy duty 24-hour timer to control your lighting schedule, rope ratchets to hang your grow light and a Grow Gadgets hygrometer/thermometer to monitor your tempreture and humidity level. The extraction system for this kit comes in the form of a 5-Inch Mammoth TT fan, coupled with a professional grade Mammoth carbon filter. This powerful combination ensures that no un-wanted odours will leave your grow space, while boosting CO2 levels and maintaining optimal humidity levels. Easy to assemble - supplied dismantled so that it can fit through tight spaces (up loft hatches, etc.)

Maxibright Daylight 660W LED Pro Product Details:

It emits intense levels of red light that will cause fruits to swell up in size as you progress through the flowering stages. Naturally, the unit is full spectrum, so there's also a very healthy level of blue in there to keep the stretching down and optimise the quality of the crop. There's some far-red too which stimulates the flowering / fruiting process. You can see the optimised spectrum by taking a look at the 'About' section.