TP-Link Deco S4 AC1200 Whole-Home Mesh Wi-Fi System, Qualcomm CPU, 867Mbps at 5GHz+300Mbps at 2.4GHz, MU-MIMO, Beamforming, Work with Amazon Echo/Alexa, Pack of 3

Product Information

Please set up the Deco units on the same network via Wi-Fi at first through the Deco app before you wire them together. Deco Mesh, модулите работят заедно, за да образуват обединена мрежа с едно име. Устройствата автоматично превключват между Deco модулите, докато се движите из дома си, за да осигурят най-бързите възможни скорости. Insights) можете да проверявате кои сайтове посещават вашите деца и колко време прекарват във всеки от тях. Това е чудесен начин да знаете, че вашите деца са в безопасност и че се забавлявай онлайн. Since 1982, PCMag has tested and rated thousands of products to help you make better buying decisions. See how we test.

Deco S4 (3 модуула) доставя Wi-Fi signal на площ до 370 квадратни метра. И ако това не е достатъчно, просто добавете още Deco модули към мрежата, за да увеличите покритието. The Speed test in Deco Lab, if available, measures your cellphone's real-time speed, the results of this speed test should be the same as the Speed test App from Ookla. Deco works in Router mode by default, please note that the satellite Deco is requested to wired to the LAN port of the main Deco or a switch connected to main Deco’s LAN port to avoid a network loop. When the Deco is set to work under Access Point mode, you can wire satellite Deco to any Deco unit or the main modem/router. Wired: Turn off the Wi-Fi (if any) on your computer and connect to the router using an Ethernet cable. Port 10/100/1000Mbps Desktop Switch 【TL-SG108】: https://www.tp-link.com/business-networking/unmanaged-switch/tl-sg108/Deco използва система от модули, за да постигне безпроблемно Wi-Fi покритие в целия дом - премахва завинаги зоните със слаб сигнал или без сигнал!

Connect More Devices: Deco can handle traffic from even the busiest of networks, providing lag-free connections for up to 100 devices †.When Deco works with an existing router, it is suggested to turn off the router's Wi-Fi network and use Deco's Wi-Fi network instead to minimize the wireless interference. Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device. This is because that different Deco models may support different advanced features. In this case, Deco M5 supports HomeCare while Deco X90 supports HomeShield. Whether the Deco app displays HomeCare or HomeShield features, depends on which Deco model is set up as the main Deco. Why does Parental Control show my device has reached the time limit while it actually hasn’t? 06-01-2022 23094 Disconnect every wireless device if you are trying to measure the maximum wireless speed of Deco units, if multiple wireless devices are using the Wi-Fi network at the same time, speed test results might not be satisfying.

Always reconnect Wi-Fi on your cellphones/laptops every time you perform a speed test; some wireless devices may not support mesh and connect to the wrong Deco node, causing a speed decrease. If you are using a wired PC to test speed, please make sure all the Ethernet cables and PC support 1Gbps (Gigabit) connection. (Ignore this if your broadband is slower than 100Mbps) Please connect two Deco units directly without the switch if there is one between the Deco units. If the direct connection works, the issue may be related to the switch.Deco works well with a modem router, however, it’s suggested to configure the modem router in bridge mode to avoid some technical problems, such as double NAT.

Whole Home Coverage: Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage up to 5,500 sq.ft. †— eliminate weak signal areas once and for all!And if that’s not enough, simply add more Decos to the network anytime to increase coverage.Why did I receive a new device connection alert when a known device joined the network? 06-25-2023 53469